Wheeler and Wilson sewing machine No.9

23.02.2019 2 Comments

Wheeler & Wilson 8 sewing machine

In the D-9 was introduced which adapted the mechanism of the No. Externally the most obvious difference was the hand appliance which was more compact. In Great Britain the D-9 was primarily sold as a hand machine although it could be used with a treadle. Following the initial launch of the machine the company seems to have dropped the "D" and simply advertised it as the No. Made at Bridgeport, Connecticut around , this machine has a gantry mounted handcrank which also incorporates the bobbin winder.

The right hand slide plate is stamped with the serial number and three patent dates the last being July 17 The No. The base is not enclosed instead the machine and handcrank are mounted on a plinth which stands on four turned feet.

Wheeler & Wilson

It has a bentwood case with rope handle. The case has two prongs which locate in the brass sockets either side of the base.

The prongs are threaded and would have had a butterfly screw to hold the case firmly in position.

The Wheeler & Wilson Sewing Machine Company of Bridgeport, Connecticut,. Manufacturers of the finest sewing machines in the world. A rare cover now in my?. Early Low Bed; Wheeler & Wilson Straight Needle Machine This model represents the same type of sewing machine, but fitted with a straight Please note this model is not covered by Mr NeedleBar's dating, which. In Mr. Wheeler joined the firm Warren & Woodruff of Watertown, A second reciprocating shuttle sewing machine was made and Wilson's first patent, US , was granted on November 12, DATING WHEELER & WILSON.

The unusual design of the base means that the left hand end of the plinth is actually attached to the case! D-9 machine Serial No. Made at Bridgeport, Connecticut aroundthis machine has a bentwood case with metal handle.

The left hand slide plate which covers the bobbin area is missing. The right hand plate is stamped with the serial number and D-9 and there are seven patent dates the last being Aug 2nd The D-9 adapted the mechanism of the No.

DATING WHEELER & WILSON - Fiddlebase Machine Head, Old Sewing Wheeler and Wilson Number 8 Sewing Machine, Original manual PDF. Wheeler & Wilson Hand-Crank sewing machine, c's. Machine HeadAntique The last patent date on this machine is and it takes round bobbins! DATING. WHEELER & WILSON SEWING MACHINES. In , the new W&W No?. 8 machine was introduced and a new series of serial numbers was initiated.

This machine has a bentwood case with metal handle. The four point locking mechanism was patented in and was used on the No. The machine is held in place by two long screws which pass from the bottom of the base into the underneath of the machine casting.

Dating wheeler and wilson sewing machines

The "New No. Rose Sullivan's photos of her short base D9 with another version of the base.

How to Thread an Antique Wheeler & Wilson No. 8 Treadle Sewing Machine and Bobbin Case

Despite the provision of an accessory compartment, accessories for this model generally came in a carved, or plain, hardwood box yet there never seems to a place for storing it in the case. The first portable covers were bentwood but eventually they became much more 'square', often with the case handle recessed into the top. The Number 9 later, D9 was regularly supplied as a portable hand crank with several treadle versions also available; in tables with 1, 3, 5 or 7 drawers and several enclosed 'parlour' cabinets.

It threads from right to left and uses a x1 9W1 needle. To keep the overall height of the short-base down, the thread post is mounted behind the arm, rather than on top.

If the wooden base contains an accessory compartment, it measures 15"; though not all of them had this feature. David Best on his website www.

Inthe Wheeler and Wilson Co. The company immediately rebranded the machine as the Singer 9W1. Several other changes introduced by Singer for models 9W7 to 9W13 required another bobbin change and totally new castings; including a longer bed and new spacing for the hinge pins to be accommodated in standard Singer cabinets. By the end of production in though some maintain the sSinger had scrapped the captive thread post in the centre of the arm, replacing it with a simple rod fixed to a re-designed, pear-shaped cover plate above the top of the pillar.

Wheeler & Wilson four-motion feed sewing machine took out his first patent, which bore the date November 12, Information on the Wheeler and Wilson Model D9 sewing machine. However, the slide cover plate still bore the W&W patent date of August 2nd By the. Wheeler & Wilson's No. 9 machine was introduced in it was designed for Family use with its high arm it was advertised as 'The Only Perfect Sewing.

A modified version of which would later re-appear on the Though, inexplicably, I have a 9W manual dated as late as Not many class 9 machines seem to have survived which may be a clue to its popularity.

ISMACS is an organization totally independent of all sewing-machine manufacturers, past or present and is not affiliated with any of the companies mentioned in these pages. Reproduction or copy of this page, in any form, in part or in whole, is strictly prohibited, without prior, written permission. Manufacturers If your sewing machine, accessory, or ephemera has a name on it, this is the place to start.

When was my Sewing Machine Made? How much is my Sewing Machine Worth?

Join Us Today. Single thread post D9-H Lee King's stand-mounted hand crank. The above machine; rear view.

2 thoughts on “Dating wheeler and wilson sewing machines”

  1. Excuse, I can help nothing. But it is assured, that you will find the correct decision. Do not despair.

Leave a Reply

Your email address will not be published. Required fields are marked *